Installation guide

Synapse Installation Guide Back to Contents
Installation 37
To attach the Desktop Stand for desktop installation:
1. Select a Deskset position. The desktop setup requires the Deskset Stand and provides
two positions, Option 1 at 45° and Option 2 at 60°, as shown in Figure 20. If you use
Option 2, rotate the Handset tab as explained in “To rotate the Handset tab for wall
and Deskset Option 2 installation:” on page 38.
Figure 20. Deskset Stand Options
2. Place the Deskset on a flat surface with the power and network ports facing you, as
illustrated in Figure 22.
3. Place the stand, illustrated in Figure 21, on the base with the flexible tab side away
from you.
Figure 21. Deskset Stand Tabs
4. Insert the solid tabs of the stand into the Option 1 or Option 2 slots on the base that
are marked in red in Figure 22.
5. Corded Headset
Jack
Actual jack location may be different than shown
6. Corded Handset
Jack
7. Wall-Mount Slots See “To install the Deskset on a wall:” on page 41.
Option 1
Option 2
Flexible Tabs