Installation guide

Synapse Installation Guide Back to Contents
Installation 51
TL7600 Cordless Headset Installation
Charger Installation
To install the TL7600 charger:
1. Plug the small end of the charger power adapter into the jack on the underside of
the charger, then route the cord through the slot.
2. Plug the large end of the charger power adapter into an AC wall outlet not controlled
by a wall switch.
The TL7600 Cordless Headset requires registration to an SB67030/031
Deskset or SB67025 Deskset. The SB67020 Deskset does not support the
TL7600 Cordless Headset.
Power Jack