Installation guide

Synapse Installation Guide Back to Contents

Getting Started 59

SIP Gateway Features

Figure 32 illustrates the SIP Gateway features and connections.

Figure 32. SIP Gateway Features and Connections

2 3 4 5

1. Display Provides system and network status, device information,

and configuration data. See “Gateway Front Panel

Interface” on page 61.

2. Reset Restarts the Gateway when pressed momentarily.

Restores factory defaults when pressed and held for

more than five seconds with the LAN cable not

connected.

3. AuxNet Port Reserved for future use. This Ethernet port will be

enabled in a future product upgrade.

4. RJ-45 Ethernet LAN Port Connects to the Synapse network.

10Base-T/100Base-Tx with Auto MDI/MDI-X switching.

5. DC 12V Power-Supply Jack