Installation guide

Synapse Installation Guide Back to Contents
Getting Started 61
Gateway Front Panel Interface
You can access basic information and perform some configuration tasks using the
Gateway’s front panel. Most of these tasks are easier to do using the WebUI. See “WebUI
Overview” on page 76.
Use the Gateway Main menu to perform some system operations. To access the Gateway
Main menu from the Idle screen, as shown in Figure 34, press the key.
Figure 34. Gateway Idle Screen (PSTN Gateway shown)
From the Main menu you can access the:
 Device Information screen
 Network Status screen
 Configuration menu.
Figure 35. Gateway Menu Screens
Press the key to highlight an entry, then press to see information about
your Gateway or your Network.
 Select Configuration to view or modify some Gateway settings. See “Gateway
Configuration” on page 62.
 On the Device Information screen, you can view:
 On the Network Status screen, you can view:
Press to return to the Main Menu.
 Model #
 Serial #
 Boot Version
 Software Version
 Firmware Version (PSTN Gateway only).
 IP Address
 Subnet Mask
 Default Gateway
 DNS Server x
 MAC Address
 Network Port
 Local Address.
30)(%
3671/LQHV
6\QFKURQL]HG
,3