Installation guide

Synapse Installation Guide Back to Contents
Getting Started 66
ATA Features
When an ATA is first connected to your LAN, the two FXS ports are configured as POTS
phone lines and assigned the next available extension numbers. ATA extension numbers
do not appear in the Extension list on Deskset screens. They do, however, appear on Call
Logs, Redial lists, and Message lists. The ATA extensions do not count toward the
100-extension limit of the Synapse system.
In addition, one 10/100BT Ethernet port (labeled LAN) is provided for communication
with the Synapse network. The front panel LCD and buttons allow network configuration,
firmware upgrades, and information functions. Figure 37 illustrates the ATA features and
connections.
Figure 37. ATA Features and Connections
1
2 3 4 5 6 7
1. Display Provides system and network status, device information, and
configuration data.
2. Reset Restarts the ATA when pressed momentarily. Restores factory
defaults when pressed and held for more than five seconds with
the LAN cable not connected.
3. FXS 1, FXS 2 Station ports for analog telephones, a fax machine, door phone, or
overhead paging equipment.
4. AUX IN Audio in for Music on Hold.
5. AUX OUT Audio out, an option for overhead paging.
6. RJ-45 Ethernet Network Port 10Base-T/100Base-Tx with Auto MDI/MDI-X switching.
7. DC 12V Power-Supply Jack