Installation guide

Synapse Installation Guide Back to Contents
Getting Started 67
Figure 38 and Table 8 provide an illustration and description of the ATA front panel.
Figure 38. ATA Front Panel Description
Power LED
Status LEDs
Menu
Navigation
Keys
Table 8. ATA Front Panel Keys and LEDs
Key Used To: LED Description
Navigate through the menus, and
to increase/decrease editable
fields.
Highlight the previous or next
item in the list.
FXS 1
FXS 2
Station port status LEDs indicate:
Off—No connection detected or idle
Green (steady)—Line activity
detected
Green (flashing)—Ringing
Display the Main menu when in
idle mode or while in network
detection mode.
Save current setting and return
to previous menu.
AUX IN
AUX OUT
Audio status LEDs indicate:
Off—Not configured in the WebUI
Red (steady)—Configured in the
WebUI, but no connection detected.
Green (steady)—Configured and
connected.
Green (flashing)—Paging active.
Terminate current operation
without saving new settings and
to return to the previous menu.
POWER Off—No power to the device.
Green—When power is present.