Installation guide

Synapse Installation Guide Back to Contents
Installation 6
C HAPTER
1
I NSTALLATION
This section describes the physical installation of the Synapse devices. Each system must
include at least one PSTN Gateway, one T1 Gateway, or one SIP Gateway. Each PSTN
Gateway supports up to four analog telephone lines. Up to four PSTN Gateways can
support up to 16 analog telephone lines. The T1 Gateway supports up to 23 T1 PRI voice
channels.
 “System Overview” on page 7
 “Recommended Installation Sequence” on page 13
 “Planning Your System and Network Configuration” on page 15
 “Network Requirements” on page 15
 “Assigning Telephone Lines and Extensions” on page 19
 “Gateway and ATA Placement” on page 30
 “Gateway Installation” on page 33
 “Deskset Installation” on page 36
 “SB67050 ATA Installation” on page 43
 “SB67040 Cordless Handset Installation” on page 48
 “TL7600 Cordless Headset Installation” on page 51.
You can view Synapse installation videos at
www.telephones.att.com/smb. In the top navigation menu, click
Support and then Video Gallery.