Installation guide

Synapse Installation Guide Back to Contents
System Configuration 75
C HAPTER
3
S YSTEM C ONFIGURATION
You can configure the Synapse System using the WebUI. The WebUI consists of web
pages with editable settings for the system and each Synapse device. The WebUI is
embedded in every Synapse device. When you access the WebUI, you are accessing it on
the device, not on the Internet.
This chapter shows you how to access and log in to the WebUI. This chapter also lists
the settings you may have to configure to commission a basic Synapse System with
Gateways, Desksets, ATAs, and an optional fax machine and paging system.
To configure the SB67080 Expansion Module, see the SB67080 Expansion Module
Installation and Configuration Guide at
www.telephones.att.com/synapseguides.
To fully configure a newly installed Synapse System, see the Synapse
Administrator’s Guide at
www.telephones.att.com/synapseguides.
This chapter also includes some settings you may have to configure as part of the
installation process:
 “Configuring a Trunk Port (FXO) Door Phone” on page 83
 “Line Configuration” on page 89
 “Updating Devices” on page 90
 “Product Registration” on page 94.
The feature descriptions and sample screens in this chapter are from a system
that includes optional devices. Your Deskset screens and WebUI pages may be
different. For example, if your system does not include an ATA, the Fax
Configuration, Group Mailbox, Overhead Paging, and ATA Settings links do not
appear in the WebUI menu.