Installation guide

Synapse Installation Guide Back to Contents
Installation 7
System Overview
AT&T SB67010 PSTN Gateway — Each PSTN
Gateway provides access to up to four analog
outside telephone lines. The system can have up to
four PSTN Gateways, supporting up to 16 telephone
lines. Information that is only about the PSTN
Gateway is designated by [PSTN] in this guide.
AT&T SB67060 T1 Gateway — The T1 Gateway
supports the T1 PRI (Primary Rate Interface) that
provides access to up to 23 voice channels to
support up to 23 simultaneous calls. A system can
have only one T1 Gateway. Information that is only
about the T1 Gateway is designated by [T1] in this
guide.
AT&T SB67070 SIP Gateway — The SIP Gateway
enables calls using a SIP Trunk Service Provider. A
system can have only one SIP Gateway. Two
separate Synapse systems with SIP Gateways can
enable calls between “Remote Sites” on a privately
managed network. Information that is only about the
SIP Gateway is designated by [SIP] in this guide.
AT&T SB67020/025 Deskset — A Deskset with a standard screen
and Programmable Feature Keys. A system can have up to 100
Desksets, and you can combine SB67020/025 and SB67030/031
Desksets. The SB67025 has a DECT 6.0 radio to host an optional
Cordless Headset. Information that is only about the SB67020/025
Deskset is designated by [020/025] in this guide .
AT&T SB67030/031 Deskset — A Deskset with a large screen and
a DECT 6.0 radio to host the optional Cordless Handset and Headset
accessories. A system can have up to 100 Desksets, and you can
combine SB67030/031 and SB67020/025 Desksets. Information that
is only about the SB67030/031 Deskset is designated by [030/031]
in this guide.
AT&T SB67080 Expansion Module — The SB67080 is an expansion
unit for Desksets, providing extension monitoring and quick dialing
other extensions and external numbers. The Synapse system can
support up to 10 Expansion Modules. Each Expansion Module is
intended to be paired with only one Deskset.
To install the Expansion Module, consult the SB67080 Expansion Module
Installation and Configuration Guide at
www.telephones.att.com/synapseguides.