User`s guide

Web Interface 139
Synapse SB67020 Deskset User’s Guide
Basic Settings
The remaining procedures in this chapter assume that you are already logged in to the WebUI. See “Accessing the Web User
Interface (WebUI)” on page 136
.
 To modify the Basic Settings:
Figure 220. WebUI Basic Settings, Part 1
(Call Appearance mode shown)
After logging in, the Basic Settings menu appears as
shown in Figure 220. Your Extension Name, which the
system administrator enters, is displayed on internal
calls. In Call Appearance mode, callers using the Auto
Attendant can search for your Extension Name to reach
your extension.
1. Configure Basic Settings as desired.
 Enabling Call Forward All in this window
immediately forwards all calls to the destination
you select instead of ringing your extension. To
enable call forwarding of all calls:
a. Click the Call Forwarding: On button.
b. Select the Target Type:
 Voicemail: Select either Personal or, if
your system has Group Mailboxes, one
of the Group Mailboxes.
In Line Appearance mode, only the Set
Password setting is available.