User`s guide

Deskset Settings 186
Synapse SB67030/031 Deskset & Accessories User’s Guide Back to Contents
5. Press on the Deskset. Registration in Progress... appears while the
Deskset searches for the Handset. Once found, the Registration in progress...
screen appears on the Cordless Handset.
When registration is complete, Cordless Handset is currently Registered appears
on the Deskset and the Handset Registered screen appears on the Cordless
Handset.
6. Press on the Deskset. The Cordless Settings menu appears.
Registering an Optional Cordless Headset
You can register only one AT&T SB67040 Cordless Handset and only one AT&T TL7600
Cordless Headset to a Deskset. When a Deskset has cordless accessories, they are all
part of the same extension, and only one device can be used at a time.
To register the TL7600 Cordless Headset:
1. Call Appearance mode — Press MENU, then 2, and then 6.
Line Appearance mode — Press MENU, then 2, and then 3.
The Cordless Settings menu appears.
2. Press 2 to display the Cordless Headset Registration screen.
It does not matter which device starts the registration process.
Register
Handset
Registered.
Exit
Registration can be terminated by pressing CANCEL on the Deskset.
If the Cordless Handset is registered to another Deskset, it must be
deregistered first.
The Headset must be in the charger, otherwise registration cannot proceed.
Even if the Cordless Headset has been in its charger, remove and replace
the Cordless Headset before you press on the Deskset.
Register