User`s guide

Overview 21
Synapse SB67030/031 Deskset & Accessories User’s Guide Back to Contents
Call Status Icons
Table 7 shows and describes the call status icons.
Call Status LEDs
The Call Status LED flash patterns indicate call status as described in Table 8. In Call
Appearance mode, the LEDs indicate call status for a single Deskset. In Line Appearance
mode, all Desksets that share lines also display the same LED activity. For example, if
someone puts a call on line 3 on hold, the Line Appearance key for line 3 flashes slowly
on all the Desksets that share PSTN line 3.
Table 7 Deskset Call Status Icons
Icon Status Icon Status
Available
Indicates an available Call Appearance (or
Line Appearance if the system
administrator has not named your lines).
Lifting the corded handset changes the
icon from Available to Off Hook.
Incoming Call
Indicates an incoming call when there
are no other calls.
Intercom
Line Appearance mode only —
Indicates an available Intercom line for
internal calls.
Ringing
Indicates an incoming call.
Off Hook
Indicates that you have lifted the corded
handset, pressed SPEAKER or HEADSET,
or you are on a phone call.
Silenced Ring
Indicates an ignored incoming call.
Predial
Call Appearance mode only —
Indicates
that you have pressed at least one
dial-pad key. These numbers are dialed
when you go off hook.
Ring Group or Call Queue Ringing
Call Appearance mode only — Indicates
an incoming Ring Group or Call Queue
call.
Call Screening
Call Appearance mode only — Indicates
the caller is leaving a message. You can
answer the call, listen to the recording in
progress, or return to the idle screen.
On Hold
Indicates you have put the call on hold.
Conference
Indicates a conference call.
Conference On Hold
Indicates you have put a conference call
on hold.
Cordless Handset
Call Appearance mode only — Indicates
that the optional Cordless Handset is
currently in control of operations.