User`s guide

Overview 32
Synapse SB67030/031 Deskset & Accessories User’s Guide Back to Contents
Using the Cordless Handset Speakerphone
When the speakerphone is active, the SPEAKER key is lit. In Idle or Dial mode, this key
behaves like PHONE, except that audio is from the speakerphone.
To use the speakerphone:
 To initiate a call, press SPEAKER. The key becomes lit, you hear a dial tone, and
the active call screen appears. You can dial.
 To end a call, press OFF. Pressing SPEAKER does not hang up calls. The key
backlight goes out and the Idle screen shown in Figure 16 on page 29 appears.
 During an active call, pressing SPEAKER switches audio between the Handset
and the speakerphone.
Switching Between Deskset and Cordless Handset
When you are on a call at a Deskset and you need to move away from the Deskset, switch
the call to the Cordless Handset.
To switch a call from Deskset to Handset:
1. On the Handset, press PHONE. The Deskset-in-use notification screen appears.
2. Press on the Handset.
To switch a call from Handset to Deskset:
1. On the Deskset, press the lit Call Appearance key, or press SPEAKER.
ON A CALL
CIDEXT_#s
12:30p Feb 23
EXT 201
Fraser Walters
2 New CALLS
0 New MSGs
Deskset in Use.
Press
SWITCH
to
use this handset.
SWITCH
12:30p Feb 23
CANCEL
SWITCH