User`s guide

Outgoing Calls 46
Synapse SB67030/031 Deskset & Accessories User’s Guide Back to Contents
Live Dialing
You can make a call by going off hook, then dialing a phone number.
To dial a live number:
1. Do one of the following to go off hook (to hear the dial tone) from Idle mode:
 Lift the corded handset.
 Press SPEAKER or HEADSET.
 Press an available Call Appearance or Line Appearance key.
2. Enter the extension number or phone number you want to dial, as shown below (Call
Appearance mode shown).
 Call Appearance mode only — For outside calls, enter 9 or whatever digit, if any,
that must be dialed first.
 Hyphens are automatically inserted except when whatever digit, if any, that must
be dialed for outside calls is followed by a 0 for an outgoing international call.
 When you dial more digits than can be displayed, the digits move to the left so
that the most recently dialed digits can be seen. Three dots indicate that the first
digits are no longer visible.
The Active Call screen appears (Call Appearance mode shown).
To do this with the Cordless Handset, see “Live Dialing” on page 54.
Transfer
Quick
Dial
12:30PM Thu Feb 25 2010
9-1
Ex t Lis t PagePar kL is t
Transfer
Quick
Dial
12:30PM Thu Feb 25 2010
Transfer Conf Par k
Graham Bell 9-1-232-555-0176 2:51
Mor e 1/3