User`s guide

Outgoing Calls 49
Synapse SB67030/031 Deskset & Accessories User’s Guide Back to Contents
Making an Intercom Call
In Line Appearance mode, your Deskset uses an outside line any time you go off hook by
lifting the handset, pressing SPEAKER, or by some other method. To make an internal
(extension-to-extension) call, you must press the INTERCOM key as shown in Figure 11
on page 20. By default, key 5 is the Intercom key, but your system administrator can
configure additional Intercom keys to give you more Intercom lines.
To make an intercom call:
1. With the Deskset in Idle mode, go off hook by lifting the handset, pressing SPEAKER,
or by some other method.
2. Press the INTERCOM key, then dial the extension number.
Instead of dialing after pressing the INTERCOM key, you can press ,
highlight the desired extension number, then press or SELECT to dial the
number.
3. When your Intercom call is answered, the Active Call screen appears.
Intercom Calls apply to Line Appearance mode only.
ExtList
Call