User`s guide

Call Management 104
Synapse SB67030 Deskset and Accessories User’s Guide
Call Management Using a Headset
You can use a TL7600 Cordless Headset or a corded headset with the Deskset.
You can register an optional TL7600 Cordless Headset directly to your Synapse Deskset. There are no wires or cords
except for the power cord to the Headset charger. To learn more about the AT&T TL7600 Cordless Headset, visit our web
site at
www.telephones.att.com/smb or call 1 [phone] . In Canada, dial 1 [phone] .
 To use a Headset:
Figure 110. Headset
 From Idle mode or during a call using the corded handset or speakerphone,
press HEADSET, as shown in Figure 110.
If you have a headset connected to the jack on the bottom of the Deskset,
then that headset becomes active.
If you have a AT&T TL7600 Cordless Headset registered to the Deskset, then
the Cordless Headset becomes active.
 To send audio from the headset to the Deskset speakerphone, press
SPEAKER.
 To send audio from the headset to the corded handset, lift the handset. If the
handset is already off hook, press HEADSET to send audio to the handset.
While the handset is off hook, you can press HEADSET again to return audio
to the headset.