User`s guide

Deskset Settings 213
Synapse SB67030 Deskset and Accessories User’s Guide
Registering an Optional Cordless Headset
You can register only one AT&T SB67040 Cordless Handset and only one AT&T TL7600 Cordless Headset to a Deskset. When a
Deskset has cordless accessories, they are all part of the same extension, and only one device can be used at a time.
 To register the TL7600 Cordless Headset:
Figure 293. Cordless Headset Not
Registered
1. Call Appearance mode—Press MENU, then 2, and then 6 to display the Cordless
Settings menu shown in Figure 288 on page 211.
Line Appearance mode—Press MENU, then 2, and then 3 to display the Cordless
Settings menu.
2. Press 2 to display the Cordless Headset Registration screen shown in Figure 293.
3. Press . Registration in Progress... appears while the Deskset searches
for the Handset.
4. When registration is complete, Cordless Headset is currently Registered
appears and the Cordless Headset ON/OFF
light turns solid blue.
5. Press . The Cordless Settings menu appears.
Quick
Dial
Cordless Headset Registration
Cordless Headset is currently
Not Registered
.
Register Ex it
Place Cordless Handset in charger.
Press
Register
to begin process.
The Headset must be in the charger, otherwise registration cannot proceed.
Even if the Cordless Headset has been in its charger, remove and replace the
Cordless Headset right before you press on the Deskset.
Registration can be terminated by pressing CANCEL on the Deskset.
If the Cordless Handset is registered to another Deskset, it must be
deregistered first. See “Deregistering a Cordless Handset or Headset” on
page 214.