User`s guide

Deskset Settings 214
Synapse SB67030 Deskset and Accessories User’s Guide
Deregistering a Cordless Handset or Headset
You must deregister cordless accessories before you can register them to different Desksets. If you remove a Deskset from the
system, first deregister any cordless accessories.
 To deregister a cordless accessory:
Figure 294. Handset Registered
Figure 295. Deregistration
Confirmation
1. Call Appearance mode—Press MENU, then 2, and then 6 to display the Cordless
Settings menu shown in Figure 288 on page 211.
Line Appearance mode—Press MENU, then 2, and then 3 to display the Cordless
Settings menu.
The following procedure describes deregistering the Cordless Handset. The
process is identical for the Cordless Headset, except in Step 2, you press 2, rather
than 1 to deregister the Cordless Headset.
2. Press 1 to display the Cordless Handset Registration menu shown in
Figure 294.
3. Press . The confirmation message
shown in Figure 295 appears.
4. Press to confirm deregistration.
The Deskset screen then displays Cordless
Handset is currently Not Registered, as
shown in Figure 296. The REGISTER screen
appears on the Cordless Handset, as shown
in Figure 290 on page 211. (The Cordless
Headset ON/OFF
light slowly flashes.)
5. Press . The Cordless Settings menu
appears.
Quick
Dial
Cordless Handset Registration
Cordless Handset is currently
Registered.
Ex itDeReg
Press DeReg to deregister the Cordless
Handset.
Press Yes to deregister or No to cancel.
Cordless Handset Registration
Yes No
Are you sure you want to
deregister the Cordless
Handset?
Quick
Dial
Cordless Handset Registration
Cordless Handset is currently
Not Registered
.
Register Ex it
Place Cordless Handset in charger.
Press
Register
to begin process.
Figure 296. Handset Not
Registered