User`s guide

Deskset Settings 220
Synapse SB67030 Deskset and Accessories User’s Guide
Using Do Not Disturb (DND)
Do Not Disturb silences incoming ringing and paging. Incoming calls can still be answered as long as the Call Appearance or Line
Appearance LED is flashing.
 To enable or disable Do Not Disturb:
Figure 304. Idle
Figure 305. DND Confirmation
1. From the Idle screen shown in Figure 304
(Call Appearance mode shown), press
. (If necessary, press to
display and press .) The DND
Settings screen shown in Figure 305
appears.
2. Press to save changes.
appears in the top right of the display, as
shown in Figure 306.
OR
Press to return to Idle mode at any time.
3. Press to turn DND off. disappears from the top right of the display.
DNDDNDDND CallFw d Page Mor e 1/ 2
Quick
Dial
12:30PM Thu Feb 25 2010
2 New Missed Calls
5 New Messages
Press or to move highlight, then
press
SELECT
.
EXT 249
John Smith
Quick
Dial
DND - Do Not Disturb
[ON]
DND Settings
Conf ir m
When DND is on, all incoming calls w ill
be sent to your Call Fw d-No Answ er
destination.
Canc el
DNDDNDDND CallFw d Pa ge Mor e 1/2
Quick
Dial
12:30PM Thu Feb 25 2010
2 New Missed Calls
5 New Messages
Press or to mov e highlight, then
press
SELECT
.
EXT 249
John Smith
DND ON
Figure 306. DND Set
The DND indicator only appears in the top right of the display when Call
Forward All is disabled. When Call Forward All is set, no calls ring regardless
of the DND setting, so the DND indicator does not appear.