User`s guide

Overview 41
Synapse SB67030 Deskset and Accessories User’s Guide
Using the Cordless Handset Speakerphone
When the speakerphone is active, the SPEAKER hard key is lit. In Idle or Dial mode, this hard key behaves like PHONE, except
that audio is from the speakerphone.
Switching Between Deskset and Cordless Handset
When you are on a call at a Deskset and you need to move away from the Deskset, switch the
call to the Cordless Handset.
 To switch a call from Deskset to Handset:
1. On the Handset, press PHONE. The Deskset-in-use notification screen shown in Figure 23
appears.
2. Press on the Handset.
 To switch a call from Handset to Deskset:
1. On the Deskset, press the lit Call Appearance key, or press SPEAKER.
 To use the speakerphone:
Figure 22. Speakerphone
 To initiate a call, press SPEAKER. The key becomes lit, you hear a dial tone, and the
screen shown in Figure 22 appears. You can dial.
 To end a call, press OFF. Pressing SPEAKER does not hang up calls. The key backlight
goes out and the Idle screen shown in Figure 21 on page 37 appears.
 During an active call, pressing SPEAKER switches audio between the Handset and the
speakerphone.
12:30p Feb 23
Graham Bell
1-9-232-555-0176
00:56 ON A CALL
XFER CONF
EXT 201
Fraser Walters
2 New CALLS
0 New MSGs
Deskset in Use.
Press
SWITCH
to
use this handset.
SWITCH
12:30p Feb 23
CANCEL
Figure 23. Deskset In Use