User`s guide

Outgoing Calls 56
Synapse SB67030 Deskset and Accessories User’s Guide
Predialing
Predial is only available when the Deskset is idle or when all calls are on hold. In Predial mode, there is no dial tone. You can
only predial one phone number at a time. To begin Predial, press a dial-pad key.
 To make a Predial call:
Figure 33. Predial Number
Figure 34. Active Call
1. Enter the phone number (for example: 9-1-232-555-0176) using the dial pad, as
shown in Figure 33 (Call Appearance mode shown).
Before you call the number, you can press:
 to store the number in your Personal list.
 to delete the last digit entered.
 to insert a two-second pause into the phone number.
 CANCEL to cancel predial.
2. Lift the corded handset, or press SPEAKER, HEADSET, , or a Call
Appearance or Line Appearance key to go off hook and call the number, as shown
in Figure 34.
To do this with the Cordless Handset, see “Predialing” on page 61.
Transfer
Quick
Dial
12:30PM Thu Feb 25 2010
9-1-232-555-01
BackspcStore
To call, lif t receiv er, or press SPEAKER,
HEADSET, or key next to icon.
Call Pa us e
Transfer
Quick
Dial
12:30PM Thu Feb 25 2010
Transfer Conf Pa r k
Graham Bell 9-1-232-555-0176 2:51
Mor e 1/ 3
Call Appearance mode only—For outside calls, dial 9 or whatever digit, if any,
that must be dialed first. The hyphens appear automatically.
When you predial more digits than can be displayed, the digits move to the
left so that the most recently dialed digits can be seen. Three dots appear to
indicate that the earliest digits are no longer visible.