User`s guide

Outgoing Calls 57
Synapse SB67030 Deskset and Accessories User’s Guide
Live Dialing
You can make a call at any time by going off hook, then dialing a phone number.
 To dial a live number:
Figure 35. Entering Digits
Figure 36. Active Call
1. Do one of the following to go off hook (to hear the dial tone) from Idle mode:
 Lift the corded handset.
 Press SPEAKER or HEADSET.
 Press an available Call Appearance or Line Appearance key.
2. Enter the number you want to dial, as shown in Figure 35 (Call Appearance mode
shown).
 Call Appearance mode only—For outside calls, enter 9 or whatever digit, if
any, that must be dialed first.
 Hyphens are automatically inserted except when whatever digit, if any, which
must be dialed for outside calls is followed by a 0 for an outgoing international
call.
 When you dial more digits than can be displayed, the digits move to the left
so that the most recently dialed digits can be seen. Three dots indicate that
the first digits are no longer visible.
The Active Call screen appears, as shown in Figure 36 (Call Appearance mode
shown).
To do this with the Cordless Handset, see “Live Dialing” on page 62.
Transfer
Quick
Dial
12:30PM Thu Feb 25 2010
9-1
Ex t Lis t PagePar kL is t
Transfer
Quick
Dial
12:30PM Thu Feb 25 2010
Transfer Conf Pa r k
Graham Bell 9-1-232-555-0176 2:51
Mor e 1/ 3
When the active call begins, the soft keys change to a new set of options.