User`s guide

Incoming Calls 71
Synapse SB67030 Deskset and Accessories User’s Guide
Auto Answering
You can use the Deskset menu settings to set your Deskset to answer calls automatically, without your having to touch the phone
to answer. When you enable Auto Answer, appears at the top of the Deskset screen if and are not active,
since Auto Answer does not work if they are on.
This feature applies to Call Appearance mode only.
 To respond to an Auto Answered call:
Figure 55. Idle Screen with Auto
Answer Indicator
In Idle mode, all incoming calls ring for the amount of time specified in the Auto
Answer Delay. See “Automatic Answering” on page 205. After the last ring, a two-
second notification screen appears, as shown in Figure 56, and you hear a warning
tone. Talk after the tone.
If you do not want the Deskset to automatically
answer the call, you can press CANCEL to send
the call to the Call Forward–No Answer target.
See “Call Forward All and Call Forward–No
Answer” on page 203.
If there are multiple incoming calls, Auto
Answer applies to the first (oldest) incoming
call. Subsequent incoming calls are handled
according the Call Forward–No Answer setting.
Auto Answer does not apply to Ring Group
calls. See “Incoming Call Indication” on page 66.
DNDDNDDND CallFw d Pa ge Mor e 1/2
Quick
Dial
12:30PM Thu Feb 25 2010
2 New Missed Calls
5 New Messages
Press or to mov e highlight, then
press
SELECT
.
EXT 249
John Smith
ANS ON
If the Auto Answer Delay is set to zero, you hear no ring. Instead, the Call
Answered screen appears and you hear the warning tone.
Transfer
Quick
Dial
12:30PM Thu Feb 25 2010
Graham Bell 232-555-0176 2:51
Transfer Conf Pa r k Mor e 1/ 3
Call Answered.
Speak after the tone.
Figure 56. Call Auto Answered