User`s manual

Page Page
Play Audio from Your Bluetooth Device
1. Once your media device is connected to the dock, simply start playing the music, movie
or game and all the audio will automatically be played through SongStream.
2. Press to play/pause the audio.
3. Press + or - to adjust the volume level of the dock.
4. Keep in mind that SongStream has a 30-foot Bluetooth wireless range.
Note: The volume controls on your media device work separately from the volume controls
on SongStream.
Reconnecting Your Device
If you move out of range or turn off the Bluetooth feature on your device, the music dock
will disconnect from your device. To reconnect, simply access the Bluetooth Manager on
your device and select ATT-ID251. You will not be asked to enter the PIN code again.
Out of Range or Lost Signal
If the music device is out of range (beyond 30 feet) of the music dock or if there is
something blocking the Bluetooth signal, the LED light will flash slowly to indicate that the
Bluetooth connection with the music device has been lost.
To avoid a lost connection:
1. Move the music device back into range (within 30 feet), and/or make sure there’s a clear
line of sight between the music dock and the Bluetooth device.
2. If the connection is lost , the connection will need to be reestablished. Follow the
directions under “Reconnecting Your Device”.
1918
Operational Instructions
Bluetooth Device Compatibility
SongStream connects with all Bluetooth devices that support the A2DP profile including
iPad, iPhone, iPod touch, and most smartphones, laptops and tablets.
Setting Your SongStream Music Dock
1. Connect the AC power adapter cable to the DC input jack, and plug the DC adapter into
a wall power outlet not controlled by a wall switch.
2. Please remove any docked iPhone/iPod and make sure there isn’t an audio cable
connected to the auxiliary input on the back of the docking station.
3. Press the /PLAY/PAUSE button once. The blue LED light will start to flash
and you will hear a short beeping sound.
4. SongStream is now ready to be paired with your Bluetooth device.
Pairing Bluetooth Device
1. Go to the Bluetooth Manager of your Bluetooth device.
2. Search Bluetooth devices and select ATT-ID251 to start connecting.
3. If your device asks for a PIN code, enter “0000”.
4. Once paired, SongStream will beep and the blue LED light will flash rapidly 3 times.
5. Although SongStream can only stream audio from one device at a time, it is capable of
being paired with up to eight devices. This means that you only have to enter the PIN
code one time for each device.
Connecting a Paired Bluetooth Device
1. You will only need to pair your Bluetooth device with the dock one time.
2. The next time your Bluetooth device and the dock are in range of each other, and the
Bluetooth feature is turned on, they will automatically connect.
3. The dock will only automatically connect to the last Bluetooth device it was connected
to.
4. If your paired device does not automatically connect, navigate to the Bluetooth menu
on your device and select ATT-ID251 from the list.
Note: Your SongStream can pair with and remember multiple Bluetooth devices, however it can
only connect with one device at a time.
Operational Instructions
Bluetooth Operation