Product information guide

T217
19
Product Information Guide
MULTIFUNCTION STATION SETS
The first six buttons on the 6-button and the 24-button sets correspond to the control unit
TELCO LINE jacks.
Buttons labeled 10 through 25 correspond to the sixteen control unit STATION jacks. These
buttons are used for autodialing the 2-digit extension numbers on the 24-button set. The
numbers 7, 8, and 9 are omitted, since they have no meaning in the system.
Buttons 26 and 27 of the 24-button set are user-programmable buttons for Loudspeaker
Paging, Paging to all extensions, or for Manual Signaling others in the system. These two
buttons cannot be used for speedcalling.
Station set volume control adjustments affect three modes:
1.
2.
3.
Speakerphone - can be changed when the speaker is ON.
Ringer - can be changed when the set is ringing, or when the set is on-hook and
the speaker is OFF.
Receiver (handset) - can be changed when the set is off-hook and the speaker is
OFF. (The K2N2 handsets are clearly marked and are usable ONLY on the SPIRIT
station sets).
The system software remembers the last volume level set for each mode.
Refer to the SPIRIT User Manual, Pages 2 and 3, for a complete description of the control
keys and LEDs on the station sets.
AT&T – PROPRIETARY