User`s guide

Back Panel
The connectors and four setup switches on the back panel are shown in
Figure 1-2.
AT&T
audio
off
on
reset setup 10VAC
serial i/o out
reserved
to line
FIGURE 1-2. Back View of the SPIRIT Attendant.
●
●
reset
This recessed button resets the SPIRIT Attendant. See "Troubleshooting" for
details.
setup switches
There are four setup switches. Switches 1, 2, and 3 control the SPIRIT
Attendant response to a power outage as shown in Table 1-2; switch 4 is not
used.
TABLE 1-2. Meaning of Setup Switch Settings.
Switch
On (Down)
Off (Up)
1 Recorded announcements
Recorded announcements
are retained during a power
are erased during a power
outage
outage
2 Routes and other
Routes and other
programming parameters
programming parameters
are retained during a power
are reset to defaults during
outage
a power outage
3
The SPIRIT Attendant
The SPIRIT Attendant does
continues to answer calls
not answer calls during a
during a power outage
power outage
4
Not Used
Not Used
Installation Requirements 1-3