User`s guide

CAUTION: After connecting ac power to the SPIRIT Attendant, be
sure that switches 1 and 2 are on (down). With this setting, recorded
announcements are saved up to three hours during a power outage (if
the battery is fully charged) and routing plans and programming
parameters are retained up to eight weeks.
● 10 VAC
This is the power connection.
● serial i/o
This is the connection for the printer to perform diagnostic tests.
● audio out
Not used
● reserved
Not used
● to line
This connects the SPIRIT Attendant with the SPIRIT Attendant ConnecT/R
(118B) that connects to a station port on the SPIRIT system control unit.
1-4 Installation Requirements