User`s guide

Web Interface 103
Syn248 SB35031 Deskset User’s Guide Back to Contents
Basic Settings
The remaining procedures in this chapter assume that you have already logged on to the
WebUI. See “Accessing the Web User Interface (WebUI)” on page 101
.
After logging on, the Basic Settings page appears as shown in Figure 26. Your
Extension Name, which the system administrator enters, is displayed on internal calls.
Figure 26. Extension Basic Settings
To modify the Basic Settings:
1. If Intercom Auto Answer is enabled on your Deskset (see “Intercom Auto Answer”
on page 88), you can:
a. Disable Intercom Auto Answer.
b. Set the Intercom Auto Answer Delay from 0 to 45 seconds. Your Deskset
automatically answers Intercom calls after the delay time you select.
2. Under User Password, create or change your Deskset password. The password must
consist of numbers only and can be up to six digits long. This password is also used
for accessing your messages, Deskset settings, and logging on to the WebUI.
3. Click to save your changes.
If Intercom Auto Answer is disabled from the Deskset, this setting does not
appear.