User`s guide

Incoming Calls 29
Syn248 SB35031 Deskset User’s Guide Back to Contents
Ignoring a Call
You can ignore an incoming call by pressing to silence the ringer. The silenced
ringer icon appears, as shown in Figure 11. If you are on an active or held call, after you
press , the highlight moves back to whatever call you were on before the
incoming call.
Figure 11. Ignored Call
 Once a call is ignored:
 The key is no longer available on the incoming call screen.
 The Line key LED continues to flash.
 You can press the flashing Line key to answer the incoming call.
 Going off hook does not answer the call, but starts a new call on the next
available Line.
Ignore
Ignore
12:30PM Thu Feb 25 2010
Angela Martin 732-555-7318 0:05
Graham Bell 232-555-0176 3:34
Quick
Dial
Transfer Conf
Ignore
Your system administrator can set your Deskset to ignore all incoming calls on
selected lines. If your Deskset has one or more lines configured this way, your
Deskset automatically ignores incoming calls on those lines. Your Deskset does
not ring, but you can answer the call by pressing the key or the flashing
Line key.
Answer