User`s guide

Call Management 40
Syn248 SB35031 Deskset User’s Guide Back to Contents
Call Management Using a Headset
You can use a corded or cordless headset with the Deskset. A corded headset can be
plugged into the Headset jack on the back of the Deskset. The cordless headset must
provide its own wireless radio in a base unit that is plugged into the Headset jack. If the
headset is a compatible AT&T DECT cordless headset, it can be registered to the Deskset
and no other connections to the Deskset are required. See “Registering an Optional
Cordless Headset” on page 92.
To use a headset:
 From Idle mode or during a call using the corded handset or speakerphone, press
(HEADSET).
If you have a headset connected to the jack on the back of the Deskset, then
that headset becomes active.
If you have a AT&T DECT cordless headset registered to the Deskset, then the
cordless headset becomes active.
 To send audio from the headset to the Deskset speakerphone, press
(SPEAKER).
 To send audio from the headset to the corded handset, lift the handset. If the
handset is already off hook, press to send audio to the handset. While the
handset is off hook, you can press again to return audio to the headset.