User`s guide

Deskset Settings 92
Syn248 SB35031 Deskset User’s Guide Back to Contents
Registering an Optional Cordless Headset
You can register only one AT&T DECT Cordless Headset to a Deskset. When a Deskset
has cordless accessories, they are all part of the same extension, and only one device
can be used at a time.
To register the Cordless Headset:
1. Press (MENU), then 2, and then 5.
The Cordless Headset Registration menu appears.
2. Remove and replace the cordless headset from its charging base.
3. Press . Registration in Progress... appears while the Deskset searches
for the headset.
4. When registration is complete, Cordless Headset is currently Registered appears
and the cordless headset ON/OFF
light turns solid blue.
5. Press . The User Settings menu appears.
The headset must be in the charger, otherwise registration cannot proceed.
Cordless Headset Registration
Cordless Headset is currently
Not Registered
Register Exit
Place Cordless Headset in charger.
Press Register to begin process.
Quick
Dial
Register
Exit
Registration can be terminated by pressing CANCEL on the Deskset.
If the cordless headset is registered to another Deskset, it must be
deregistered first. See “Deregistering a Cordless Headset” on page 93.