User manual

CONNECT EACH VOICE TERMINAL TO THE SYSTEM

Place the voice terminal in its designated location.

Plug the voice terminal into the system in one of the following ways:

If You Have

And

Do This

a direct connection

the connection re-

Go on to step 3. You

from the voice ter-

quires only a single

have already con-

minal to the control

modular voice ter- nected the voice ter-

unit

minal cord

minal to the system in

step 3 of “Prepare

the Voice Terminals,”

page 15.

the connection re-

Plug the loose end of

quires one or more

the modular voice ter-

modular extension

minal cord into the

cords

jack on the extension

cord that terminates

the wiring run from

the control unit loca-

tion. Then go on to

step 3.

a jack field connec-

Plug the loose end of

tion to the control unit

the modular voice ter-

minal cord into the

wall jack at the voice

terminal location.

Then go on to step 3.

Jack field connection

Direct connection

to control unit

A red light comes on next to a button when you plug in the voice terminal.