Cordless Telephone/Answering System User's Manual

Telephone operation
Intercom
Using the telephone base:
You can initiate an intercom call at the telephone
base with any system handset.
1. Press HANDSET LOCATOR/INTERCOM on the
telephone base.
2. Enter a handset number. The screen will showEnter a handset number. The screen will show
CALLING HANDSET X. The called handset will
ring, and its screen will show BASE IS CALLING.
3. On the ringing handset, press PHONE/FLASH,
INT, SPEAKER, or any dial pad key (0-9, * or #)
to answer the intercom call.
NOTES:
1. Before the intercom call is answered, you can cancel the
intercom call by pressing CLEAR or
HANDSET LOCATOR/INTERCOM on the telephone base.
2. If the called handset is not answered within 100 seconds
or if it is in the directory or call log mode, or on a call, or
out of range, the calling handset will show the message
UNABLE TO CALL TRY AGAIN.
3. Pressing OFF/CLEAR or MUTE/REMOVE on the cordless
handset will temporarily silence the intercom ringer.
To end the intercom call:
• Press OFF/CLEAR or INT on the cordless
handset.
-OR-
Place the cordless handset in the charger.
-OR-
Place the corded handset in the telephone
base.
-OR-
Press CLEAR or HANDSET LOCATOR/INTERCOM
on the telephone base.
22