User`s manual

13
Getting started
ON/OFF
Headset base installation
Adjust lifter audio
Press MODE on the headset base to change
the mode if the LIFTER MODE light is not on.
Make sure that the LIFTER MODE light on the
headset base is on.
Lift the corded handset from the telephone
cradle.
After you install and charge the battery (see
pages 14-15), put the headset next to your ear.
Press ON/OFF on the headset and listen for the
dial tone.
If there is no dial tone or the dial tone is not
clear, slide the LIFTER AUDIO ADJUST on the
side of the headset base from A to G until the
dial tone is clear.
If the dial tone is not clear, repeat step 5 until
you find the clearest dial tone.
1.
2.
3.
4.
5.
6.
MODE
LIFTER MODE
light
LIFTER AUDIO ADJUST