User Manual

telephone base.
Step 5: Plug a telephone line cord into the telephone jack on the corded telephone base.
Step 6: Plug the other end of the telephone line cord into your telephone wall jack. If you are a
DSL internet subscriber, make sure you have a DSL filter plugged into the wall jack first
6. Ensure you have set the lifter mode correctly. If you are using a handset lifter (models TL7000 &
TL7100), press MODE on the headset base until the red indicator next to LIFTER MODE is
illuminated. If you are not using the handset lifter, ensure that NO LIFTER MODE is illuminated.
Also try adjusting the LIFTER AUDIO ADJUST on the left side of the base.
7. Move the closer to the base. The operating range may vary with environmental conditions and
time of use. There may be places within your environment that a cordless device will not work
well. If the problem only occurs in certain areas of your environment, you can conclude that
there is nothing wrong with the headset.
Other party cannot hear me
1. To raise the outbound volume, press VOLUME▲ on the cordless headset base.
To raise your headset listening volume, press VOLUME › on the cordless headset.
2. If you are using the handset lifter (model TL7000 or TL7100), try moving the LIFTER AUDIO
ADJUST, located on the cordless headset base, to a different setting (A through G).
3. Reposition your headset to ensure the microphone is in line with your mouth.