User`s manual

18
Getting started
Adding and registering a headset
Registration options
The TL7610 headset comes pre-registered to the headset base.
There are two registration options, as described below.
Option 1: The TL7610 supports up to two cordless headsets. You
can register a TL7600 (purchased separately) headset
or a previously deregistered TL7600/TL7610 headset to
your TL7610 headset base (see page 19).
Option 2: You can deregister your TL7610 headset (see page
21) and then register it to an AT&T DECT 6.0 cordless
telephone (see page 20). You can register a maximum of
two headsets (TL7610/TL7600) to a cordless telephone.
The telephone base recognizes and counts a headset
the same as a handset. When you register the headset
to an AT&T DECT 6.0 cordless telephone, the headset
base acts only as a charger for the headset. The LIFTER
AUDIO ADJUST, VOLUME / and MODE controls on
the headset base become inactive. You can place the
headset base anywhere you have an available power
outlet. Do not plug in the telephone line cord; you only
need to plug the headset base into a power outlet.
Refer to your telephone user's manual for the
maximum number of handsets that you can register
to the telephone base. If you have the maximum
number of handsets registered, you need to follow the
deregistration information in your user's manual.
Visit www.telephones.att.com/headsets for a
list of compatible cordless telephones.
You can only register the headset to one product at a time, so
the headset must be deregistered before registering to a headset
base or a cordless telephone (see page 21).
The first headset provided with your TL7610 has a blue ON/OFF
light. When you register a second headset, the ON/OFF light of
that headset turns orange to help you identify the headsets.