User guide

Getting started
10
Settings
About Settings
You may customize various settings in the SETTINGS panel
before you start using the software. Below is an introduction of
what you can set in each panel.
Use the General tab to set the headset base default mode,
headset low battery alert tone, ringer tone, headset operating
range, headset microphone muted alert, or second inbound
call alert.
Use the Landline tab to set the dial mode, no line alert display,
or the location of the ringer to be played.
Use the Softphone tab to enable or disable the alert message
when Skype or Lync is not installed on your computer, or when
their versions are incompatible with this software.
Use the Media player tab to set the action on Windows Media
Player or iTunes when there is an incoming call.
Use the Support tab to download the Installation and Operation
Guide of the software, or to obtain customer service information.
You can also check the current software and firmware versions,
or check if there is an updated software version for download.