User guide

3
Getting started
Important settings
Audio settings
After you have installed the AT&T Softphone Call Manager,
check to make sure the audio setting is properly configured
in your Windows system. If you have installed Skype and/or
Microsoft Lync and want to use them with your headset, make
sure the audio settings are configured correctly in the programs
as well.
a) Audio settings in Windows system:
Launch the AT&T Softphone Call Manager program.
Click the Settings panel, then the General panel.
Click [Click to launch audio devices control panel].
Make sure AT&T DECT Headset is selected under the
playback and recording settings in your Windows system.
b) Audio settings in Skype:
Launch the Skype program.
Click Tools, then Options.
Click Audio settings.
Make sure AT&T DECT Headset is selected under the
speakers and microphone settings.
c) Audio settings in Microsoft Lync:
Launch the Microsoft Lync program.
Click Options, then Audio device.
Make sure AT&T DECT Headset is selected under the Audio
device setting.
i.
ii.
iii.
iv.
i.
ii.
iii.
iv.
i.
ii.
iii.
IMPORTANT
Periodically check for software updates. Go to the SETTINGS panel in the
AT&T Softphone Call Manager, then click Check Update in the Support
tab. For more details, refer to the Updates section on page 19.