User`s manual

11
Getting started
Installation
See pages 12-13
for easy instructions.
You must install and
charge the battery before
using the headset.
STOP!
Colored labels
The cords have colored labels that guide you to plug them into
the correct headset base jacks. The back of the headset base
has color-coded dots and the names of the jacks above them
that correspond to the colored labels on the cords.
Digital subscriber line (DSL)
If you subscribe to high-speed Internet service (DSL - digital
subscriber line) through your telephone line, you must install a
DSL filter between the telephone line cord and telephone wall
jack (see page 15, 17 or 20). The filter prevents noise and caller
ID problems caused by DSL interference. Please contact your DSL
service provider for more information about DSL filters.
For customer service or product information, visit our website at
www.telephones.att.com/smb or call
1 [phone]. In Canada, dial 1 [phone].
Avoid placing the headset base too close to:
• Communication devices such as television sets, VCRs or other
cordless telephones.
• Excessive heat sources.
• Noise sources such as a window with traffic outside, motors,
microwave ovens, refrigerators or fluorescent lighting.
• Excessive dust sources such as a workshop or garage.
• Excessive moisture.
• Extremely low temperature.
• Mechanical vibration or shock such as on top of a washing
machine or work bench.