User`s manual

39
Operation
End a call
When the headset base is connected to the corded handset of
your telephone with the handset lifter installed:
Press on the headset to end a call. The switch hook presser
pushes down the switch hook and ends the call.
When the headset base is connected to a telephone wall jack:
Press on the headset or place the headset in the headset base.
Headset ringer
The headset base and headset do not have external ringers.
When you receive calls, the headset earpiece rings. If you have
telephones connected to the same telephone line as the headset
base, you can rely on the ringers of those telephones to alert
you to incoming calls.
To change the volume of the earpiece ringer:
Slide the volume switch at the top of the headset towards
VOL+ or VOL- when the headset is not in use.
To turn off the earpiece ringer:
Slide the volume switch at the top of the headset towards
VOL- until you hear two beeps when the headset is not in use.
•
•
•
•
PHONE mode