User`s manual

Appendix

Troubleshooting

The light on the headset is off while charging.

• Make sure the power and line cords are plugged in correctly

and securely.

Make sure that the battery is securely installed in the

cordless headset.

Make sure the headset is sitting properly in the base to charge.

• Unplug the unit’s electrical power. Wait for 15 seconds,

then plug it back in. Allow up to one minute for the cordless

headset and headset base to reset.

Clean the cordless headset and headset base charging

contacts each month using a pencil eraser or dry cloth.

• Your headset or headset base might be defective. Refer

to the Limited warranty section on pages 65-67 for

further instructions.

The switch hook presser of the handset lifter doesn’t rise at all.

• Make sure the CORDED HANDSET CONNECTED switch on the

headset base is set to YES.

• Make sure the lifter control cable is securely plugged into the

LIFTER jack on the headset base.

Make sure all cords and the telephone line cord are securely

connected to the proper sockets.

• Make sure the headset base has power.

Make sure your headset is charged and registered to the

headset base.

•