User`s manual

56
Appendix
My corded phone is ringing, but my headset is not ringing.
• Make sure the CORDED HANDSET CONNECTED switch on the
headset base is set to YES.
• Make sure that the RING ON/OFF button on the lifter is turned
on. If the RING ON/OFF button is turned off, the headset does
not ring.
• If the speaker of your corded phone is not located under the lifter,
install the auxiliary ring detector. See page 26 for instructions.
• It may be necessary to adjust the sensitivity of the ring
detector. See page 27 for instructions.
• If an auxiliary ring detector is used, make sure its cord is
completely plugged into the handset lifter.
• Make sure all cords and the telephone line cord are plugged
into the appropriate outlets.
• Make sure your headset is charged.
I cannot dial out on the headset when the CORDED HANDSET
CONNECTED switch is set to YES.
• Try all the suggestions above.
• Make sure you have a dial tone before dialing.dialing.. It is normal for
a telephone base to take a second or two before producing a
dial tone. Wait an extra second before dialing.dialing..
The other party cannot hear my voice during a call.
• Make sure your headset microphone is not muted.
During a call, slide the corded handset audio adjust switch at
the bottom of the headset base from A to F until you obtain
good sound quality.
•
Troubleshooting