User Guide

13
Getting started
Headset base installation
Option 2: Connect the headset to a corded phone
Make sure the CORDED HANDSET
CONNECTED switch on the right side of the
headset base is set to YES.
Connect the line cords, as shown below.
Use the included corded phone connection
cable to connect the headset base to your
corded telephone.
1.
2.
Plug one end of the
corded phone connection
cable into the CORDED
PHONE CONNECTION
jack (blue dot) at the back
of the headset base.
•
A DSL filter (not
included) is required
if you have DSL
high-speed Internet
service. The DSL filter
must be plugged into
a telephone wall jack.
Unplug the curly
handset cord from
the handset jack
on the corded
phone and plug
it into the jack on
the corded phone
connection cable.
•
Corded phone
Plug the other end
of the corded phone
connection cable into
the handset jack on
your corded phone.
•
Use the attached
fastener to bundle
all line cords neatly.
•