User`s manual

Appendix
41
I cannot dial out.
Try all the suggestions above.
You must use a telephone on the same line or the corded
phone connected to the headset base to dial out. Once you
have dialed the number, you can press to join the call
(page 28).
If other phones in your home or office are having the same
problem, the problem is in your wiring or local service. Contact
your telephone service provider (charges may apply).
My cordless headset isn’t performing normally.
Make sure the power cord is securely plugged into the headset
base. Plug the unit into a different, working electrical outlet
not controlled by a wall switch.
Move the cordless headset closer to the headset base. You
might have moved out of range.
Reset the headset. Power off the headset and then power it
on (page 27). Allow up to one minute for the cordless headset
and headset base to reset.
Reset the headset base. Unplug the unit’s electrical power.
Wait for 15 seconds, then plug it back in. Allow up to one
minute for the cordless headset and headset base to reset.
Other electronic products such as HAM radios and other DECT
phones can cause interference with your cordless headset.
Try installing your headset as far away as possible from these
types of electronic devices.
•
•
•
•
•
•
•
•
Troubleshooting