User`s manual

Introduction
The TL7910 is a cordless headset and base that allows you to
have handsfree phone conversations. It can be used in different
ways depending on your needs. Choose from the following three
options. Connect your TL7910:
To a telephone line only (page 12). Connect the headset to a
telephone wall jack. Use the telephones on the same telephone
line to make or answer calls. The headset is a supplementary
device that can join the calls.
To a traditional corded telephone (pages 13-14). Connect
the headset to a corded telephone. If you also install a
lifter (AT&T TL7100, purchased separately) on your corded
telephone, you can use the headset to remotely control the
lifter for answering or hanging up a call.
To both a PC and telephone line (pages 15-17). Connect
a phone line to the headset base and the USB cable to
your PC. You can make and answer VoIP calls through
Skype or Microsoft Lync, or landline calls using the
AT&T Softphone Call Manager. You can also use the voice
command feature to make or answer calls after you have
installed the AT&T Softphone Call Manager.
Install the AT&T Softphone Call Manager using the
CD-ROM provided in the package.
-OR-
Visit www.telephones.att.com/downloads to
download the software. Unzip and install the file after
download.
For installation and operation instructions of the software,
refer to the Installation and Operation Guide which can
also be found in the CD-ROM provided or the web site stated
above.
•
•
•
Getting started
1