Operation Manual

64
Answering system
Answering system settings
Call screening
The call screening feature lets you listen at the telephone base to a caller
leaving a message. You can turn this feature on or off with either your
handset or telephone base. Unless you change it, the call screening feature is
preset to on.
Using the telephone base:
1. Press the MENU soft key when the telephone base is not in use.
2. Press the SELECT soft key to select Answering sys.
3. Press qCID or pDIR to choose Mailbox 1 or
Mailbox 2, then press the SELECT soft key. The
corresponding icon,
1
or
2, flashes on the screen.
4. Press qCID or pDIR to scroll to Ans sys setup, then
press the SELECT soft key.
5. Press the SELECT soft key again to select
Call screening.
6. Press qCID or pDIR to select On or Off, then press
the SET soft key to confirm your setting. There is a
confirmation tone. Or press CANCEL to exit to the
previous menu without making any changes.
Using the handset:
1. Press the MENU soft key when the handset is not in use.
2. Press the SELECT soft key to select ANSWERING SYS.
3. Press qCID or pDIR to choose Mailbox 1 or Mailbox 2, then press the
SELECT soft key. The corresponding icon
1
or
2
, flashes on the
screen.
4. Press qCID or pDIR to scroll to Ans sys setup, then
press the SELECT soft key.
5. Press qCID or pDIR to scroll to Call screening, then
press the SELECT soft key.
6. Press qCID or pDIR to select On or Off, then press
the SET soft key to confirm your setting. There is a
confirmation tone. Or press the BACK soft key to exit to
the previous menu without making any changes.
1
ANS SYS SETUP
Answer ON/OFF
Call screening
Announcement
BACK
SELECT
1
BACK
SET
CALL SCREENING
On
Off
SET
1
CALL SCREENING
On
Off
1
Delete all old
Record memo
Ans sys setup
SELECT
1
Call screening
Announcement
# of rings
SELECT