User Guide
Telephone base installation
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your user’s manual
provided in the package, or see the online user’s manual at
www.telephones.att.com/manuals.
Quick start guide
TL88102/TL88202
Caution: Use only the power adapter(s) provided with this product. To obtain a replacement,
visit our website at www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
BASE
12:45am 12/31
REDIAL MENU
DIR
Press to enter the directory when the
telephone is not in use.
Press to scroll up while in menus.
While entering names or numbers, press
to move the cursor to the right.
•
•
•
CID
Press to review the call log when the
telephone is not in use.
Press to scroll down while in menus.
While entering names or numbers,
press to move the cursor to the left.
•
•
•
CANCEL
While in a menu setting item, press to
exit without making changes or press
and hold to return to idle mode.
While the telephone base is ringing,
press to silence the ringer temporarily.
Press and hold to erase the missed
calls indicator while the telephone is
not in use.
While entering names or numbers,
press to delete a character or a digit.
•
•
•
•
Soft keys (2)
Press to select a menu item
displayed above the key.
•
Quick reference guide - telephone base
REDIAL/PAUSE
Press to review the redial list.
While dialing or entering
numbers into the directory,
press and hold to insert a
dialing pause.
•
•
DIR/VOLUME
Press to enter the directory
when the telephone is not in
use.
Press to scroll up while in
menus.
During a call or message
playback, press to increase the
listening volume.
While entering names or
numbers, press to move the
cursor to the right.
•
•
•
•
LINE 1/FLASH
Press to make or answer a call
on line 1.
During a call, press to answer
an incoming call on line 1 when
you receive a call waiting alert.
•
•
CID/VOLUME
Press to review the call log
when the telephone is not in
use.
Press to scroll down while in
menus.
During a call or message
playback, press to decrease the
listening volume.
While entering names or
numbers, press to move the
cursor to the left.
•
•
•
•
1
While reviewing a call log
entry, press repeatedly to
add or remove 1 in front of
the telephone number before
dialing or saving it in the
directory.
•
/SPEAKER
Press to make or join a call
using the first available line,
starting with line 1.
Press to answer a call using
the speakerphone.
During a call, press to switch
between speakerphone and
handset use.
•
•
•
CHARGE light
On when the handset is charging in
the telephone base or charger.
•
OFF/CANCEL
During a call, press to hang up.
Press and hold while the
telephone is not in use to erase
the missed calls indicator.
Press to delete a digit or
character while entering a
number or name.
While in a menu, press to
cancel an operation, back up to
the previous menu, or exit the
menu display; or press and hold
to return to the idle mode.
•
•
•
•
Soft keys (2)
Press to select a menu item displayed above
the key.
•
LINE 2/FLASH
Press to make or answer a call
on line 2.
During a call, press to answer
an incoming call on line 2 when
you receive a call waiting alert.
•
•
# (pound key)
Press repeatedly to show other
dialing options when reviewing
a call log entry.
•
INT
Press to initiate an intercom
conversation or transfer a call.
•
HOLD
Press to put a call on
hold.
•
Quick reference guide - handset
Battery installation
Install the battery, as shown below. Charge your handset(s) before initial use.
The battery is fully charged aer 16 hours of continuous charging.
Use only the supplied rechargeable battery or replacement battery (model BT183342/
BT283342).
Step 1
Plug the battery connector securely into the socket inside the handset battery
compartment. Insert the supplied battery with the label THIS SIDE UP facing up,
as indicated.
Step 2
Align the cover flat against the battery compartment, then slide it upwards until
it clicks into place.
Step 3
Charge the handset by placing it face forward
in the telephone base or charger. The CHARGE
light under the screen of the handset is on during
charging.
CHARGE light
Plug one end of the black telephone
line cord into the 2-line telephone wall
jack or a DSL filter.
Plug the large end of the telephone
base power adapter into a power
outlet not controlled by a wall
switch.
A DSL filter (not included) is
required if you have DSL high-
speed Internet service.
The DSL filter must be plugged
into the telephone wall jack.
Route the power adapter
cord through this slot.
Plug the small end of the telephone base
power adapter into the power adapter jack
on the back of the telephone base.
Plug the other end of the black
telephone line cord into the
LINE 1/L1+L2 telephone jack at
the back of the telephone base.
Raise the
antenna.
DSL filters (not
included) are required
if you have DSL high-
speed Internet service.
The DSL filter must
be plugged into the
telephone wall jack.
Plug one end of the clear telephone
line cord into the line 1 telephone
wall jack or a DSL filter.
Plug one end of the black telephone
line cord into the line 2 telephone wall
jack or a DSL filter.
Plug the large end of the
telephone base power
adapter into a power outlet
not controlled by a wall
switch.
Raise the antenna.
Route the power
adapter cord through
this slot.
Plug the small end of the telephone base
power adapter into the power adapter jack
on the back of the telephone base.
Plug the other end of the clear telephone line cord
into the LINE 1/L1+L2 telephone jack at the back of
the telephone base.
Plug the other end of the
black telephone line cord
into the LINE 2 telephone
jack at the back of the
telephone base.
Charger installation
Plug the power adapter into a power outlet not
controlled by a wall switch.
Option 1: Installation with 2-line jack
Option 2: Installation with separate line jacks
X/DELETE
Press to delete messages.
/REPEAT
Press to repeat a message or press twice to
play the previous message.
/SKIP
Press to skip to the next message.
•/REC
Press to record a memo or an outgoing
announcement.
•
•
•
•
/MAIL BOX 2
Press to start or stop
message playback of the
mailbox of line 2.
•
/ANSWER ON 2
Press to turn the answering system of
line 2 on or off.
•
/LINE 2
Press to make or
answer a call on
line 2.
•
HOLD
Press to put a call on hold.•
/VOLUME/
During a call, press to
adjust the speakerphone
volume.
Press to adjust the
volume during message
playback.
While the telephone
base is ringing, press
the increase or
decrease the ringer
volume.
When the telephone
is not in use, press to
adjust the telephone
base ringer volume for
all lines.
•
•
•
•
# (pound key)
Press repeatedly to show other
dialing options when reviewing a
call log entry.
•
/ANSWER ON 1
Press to turn the answering system of
line 1 on or off.
•
/MAIL BOX 1
Press to start or stop
message playback of the
mailbox of line 1.
•
/LINE 1
Press to make or
answer a call on
line 1.
•
1
While reviewing a call log entry,
press repeatedly to add or remove
1 in front of the telephone number
before dialing or saving it in the
directory.
•
FLASH
During a call, press to
answer an incoming call
when you receive a call
waiting alert.
•
Large tilt display
Move the top of
the display forward
or backward to
adjust the angle
of the screen for
maximum visibility.
•
THIS SI
DE
UP / CE
CÔ
TÉ
VERS LE HA
UT
Batt
e
r
y Pa
c
k / Bloc-piles
:
BT1833
42/BT283342 (2.4V 400mAh Ni-MH)
WA
RNING /
AV
ERTISSEMENT
:
D
O NOT BURN
O
R
PUNCTURE BA
TTERIES
.
NE
PA
S INCINÉRER
O
U PERCER LES PILES.
Made in
China / Fabriqué
en
chine BY
1021
THIS SIDE
Battery Pack / Bloc
BT183342/BT283342
W
ARNING /
AV
ERTISS
DO NOT BURN OR PU
N
NE
PA
S INCINÉRER
O
Made in China / Fa
LE HA
UT
21