User’s manual TL90073 DECT 6.
Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read Important safety information on pages 22-24 of this user’s manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. User’s manual HAUT VERS LE HAUT CÔTÉ VERS / CE SIDE CÔTÉ UPTHIS UP / CE THIS SIDE SIDE THIS LE HAUT VERS CÔTÉ / CELE UP HAUT VERS HAUT CÔTÉ VERS LE HAUT LE CÔTÉ / CE / CEVERS UPLE CÔTÉ SIDE SIDE / CEUP THIS THIS UP THIS SIDE : : / Bloc-piles Bloc-piles Battery Pack Pack / Pack Battery : / Bloc-piles Battery Ni-MH) (2.4V 400mAh (2.
User’s manual TL90073 DECT 6.0 expansion handset for use with AT&T models TL92273/TL92373/TL92473/TL96273/ TL96323/TL96373/TL96423/TL96473 with BLUETOOTH® wireless technology Table of contents Getting started Installation................................................................................................................................. 1 Quick reference guide - handset.................................................................................... 2 Charger installation....................
Table of contents For C-UL compliance..........................................................................................................25 Mesures de sécurité importantes..........................................................................25 FCC Part 68 and ACTA......................................................................................................29 FCC Part 15..........................................................................................................................
Getting started Installation You must install and charge the handset battery before using the cordless handset. See pages 6-7 for easy instructions. Your product may be shipped with a protective sticker covering the handset display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Getting started Quick reference guide - handset CHARGE light On when the handset is charging in the telephone base or charger. Softkeys (2) • Press to select the menu item displayed above the key. • While in a menu, press to select an item or save an entry or setting. CELL 1/ CELL 2 • Press to make or answer a cell call. • During a cell call, press to answer an incoming call when you hear a call waiting alert. HOME/FLASH • Press to make, answer or end a home call.
Getting started Quick reference guide - handset DIR/VOLUME • Press to scroll up while in menus. • During a call or message playback, press to increase the listening volume. • Press to show directory entries when the telephone is not in use. • While entering names or numbers in the directory, press to move the cursor to the right. CID/VOLUME • Press to scroll down while in menus. • During a call or message playback, press to decrease the listening volume.
Getting started Quick reference guide - handset PUSH TO TALK • Press to begin a one-to-one or one-to-group broadcast. • Press and hold to begin a one-to-group broadcast when the handset is not in use. Feature menu • • • • • • Main menu The selected menu item is highlighted. Menu • • • • • Play messages Answering sys Directory Caller ID log Intercom Bluetooth (for TL92273/ TL92373/TL92473) Ringers Set date/time Caller ID annc Settings Web address Using menus 1.
Getting started Charger installation Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION: • Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. • The power adapter is intended to be correctly oriented in a vertical or floor mount position.
Getting started Battery installation and charging Install the battery, as shown on page 7. Once you have installed the battery, the screen indicates the battery status (see the following table). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 11 hours of continuous charging. See the table on page 36 for battery operating times.
Battery Pack / Bloc-piles : Battery Pack / Bloc-piles : Battery Pack / Bloc-piles : BT183342/BT283342 (2.4V 400mAh Ni-MH) (2.4V 400mAh Ni-MH) BT183342/BT283342 (2.4V 400mAh Ni-MH) BT183342/BT283342 WARNING / AVERTISSEMENT : / AVERTISSEMENT : WARNING / AVERTISSEMENT :WARNING DO NOT OR PUNCTURE BATTERIES. DO NOT BURN ORBURN PUNCTURE BATTERIES. DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINÉRER OU LES PILES. NE PAS INCINÉRER OU PERCER LES NEPERCER PAS PILES. INCINÉRER OU PERCER LES PILES.
Registration and deregistration Adding and registering handsets Before using a new TL90073 handset, you must register it with an AT&T TL92273/TL92373/TL92473/TL96273/TL96323/ TL96373/TL96423/TL96473 telephone system (purchased separately). These telephone systems can support up to 12 handsets. The handsets provided with your telephone system are already registered as HANDSET 1, and so forth.
Registration and deregistration Adding and registering handsets Register a handset to your telephone base for AT&T models TL96273/TL96323/TL96373/TL96423/TL96473 1. Before you begin registration, make sure the handset is out of the telephone base or charger and shows To register, see user manual. To register, see user manual 2. Put the handset you wish to register on the telephone base cradle, not the charger. 3. Both the handset and the telephone base show Registering...Please wait.
Registration and deregistration Deregistering handsets You may need to deregister your handsets if: • You have 12 registered handsets and need to replace a handset. -OR• You wish to change the designated handset number of your registered handsets. You must first deregister ALL handsets, and then register each handset you wish to use again, one at a time. Please read carefully through all the instructions on this page before beginning the deregistration process.
Registration and deregistration Deregistering handsets Deregistering all handsets from the telephone base for AT&T models TL96273/TL96323/TL96373/TL96423/TL96473 1. Make sure that all handsets are out of the telephone base and chargers before you begin deregistration. 2. Press and hold /HANDSET LOCATOR on the telephone base for about 10 seconds until the Deregister all devices? base screen shows Deregister all devices?, then release /HANDSET LOCATOR. NO YES 3.
Appendix Troubleshooting If you have difficulty with your telephone, please try the following suggestions. For Customer Service, or to purchase accessories or replacement parts, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. The handset registration is unsuccessful. • Follow the handset registration instructions to register the handset again (see Adding and registering handsets on pages 8-9). My telephone doesn’t work at all.
Appendix Troubleshooting • If there is no dial tone on that other telephone either, your telephone line cord may be defective. Install a new telephone line cord. • If changing the telephone line cord does not help, the wall jack (or the wiring to this wall jack) may be defective. Try using a different wall jack in your home to connect your TL92273/TL92373/TL92473/TL96273/TL96323/TL96373/ TL96423/TL96473 telephone, or contact your telephone service provider (charges may apply). I cannot dial out.
Appendix Troubleshooting Out of range OR Base no power appears on my cordless handset. • Ensure you plug the telephone base in properly and the power is on. • Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to synchronize. • Move the cordless handset closer to the telephone base. You may have moved out of range. • Reset the telephone base. Unplug the electrical power. Wait for 15 seconds, then plug it back in.
Appendix Troubleshooting I get noise, static, or weak signals even when I’m near the telephone base. • If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems as a result of DSL interference. Please contact your DSL service provider for more information about DSL filters.
Appendix Troubleshooting I experience poor sound quality when using the speakerphone. • For increased sound quality while using the speakerphone, place the handset on a flat surface with the dialing keys facing up. • When using a speakerphone, controlling background noise in your environment is essential. While you are listening to your party, press MUTE/DELETE to temporarily turn your microphone off. When it is your turn to speak, remember to press MUTE/DELETE again to turn the microphone on.
Appendix Troubleshooting • The layout of your home or office may be limiting the operating range. Try moving the telephone base to another location, preferably on an upper floor. • If other phones in your home are having the same problem, contact your telephone service provider (charges may apply). • Test a working phone at the phone jack. If another phone has the same problem, contact your telephone service provider (charges may apply).
Appendix Troubleshooting • Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other phones in your home are having the same problem, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply). • Excessive background noise will cause a speakerphone to fade in and out. Try controlling the background noise by turning off any audio devices near the speakerphone.
Appendix Troubleshooting System does not receive caller ID when on a call. • Make sure you subscribe to caller ID with call waiting features from your telephone service provider. Caller ID features work only if both you and the caller are in areas offering caller ID service, and if both telephone service providers use compatible equipment. I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesn’t work. • Make sure your computer is powered on.
Appendix Troubleshooting Common cure for electronic equipment. If the telephone does not seem to be responding normally, try putting the cordless handset in the charger. If it does not fix the problem, do the following (in the order listed): 1. Disconnect the power to the telephone base. 2. Disconnect the cordless handset battery. 3. Wait a few minutes. 4. Connect power to the telephone base. 5. Completely remove the battery.
Appendix Maintenance Taking care of your telephone • Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. • Avoid rough treatment. • Place the handset down gently. • Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water • Your telephone can be damaged if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.
Appendix Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • Read and understand all instructions in the user’s manual. Observe all markings on the product. • Avoid using a telephone during a thunderstorm. There might be a slight chance of electric shock from lightning.
Appendix Important safety information • CAUTIONS: Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. • Use only the supplied rechargeable battery or replacement battery (model BT183342). To order, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Appendix Important safety information The RBRC™ Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel-metal hydride rechargeable batteries when taken out of service within the United States. These batteries may be taken to a participating local retailer of replacement batteries or recycling center. Or you may call 1 (800) 8-BATTERY for locations accepting spent Ni-MH batteries.
Appendix For C-UL compliance In compliance with the bilingual requirements for safety, caution, and warning markings of Canadian Federal and Provincial/Territorial statutes and regulations, the French version of Important safety information is included. Mesures de sécurité importantes Ce symbole vous alertera d’informations importantes ou d’instructions d’entretien pouvant apparaître dans ce guide d’utilisation.
Appendix For C-UL compliance • Si le produit ne fonctionne pas correctement, consultez la section Dépannage (Troubleshooting) des pages 12-20 de ce guide d’utilisation. Si vous ne pouvez pas régler le problème, ou si le produit est endommagé, consultez la section Garantie limitée (Limited warranty) des pages 33-35. N’ouvrez pas ce produit, sauf tel qu’indiqué dans le guide d’utilisation. L’ouverture du produit ou le remontage inadéquat pourrait vous exposer à des tensions dangereuses ou autres dangers.
Appendix For C-UL compliance Spécifiquement en rapport avec les téléphones sans fil • Confidentialité : Les mêmes caractéristiques qui rendent les téléphones sans fil si pratiques créent également des restrictions. Les appels téléphoniques sont transmis entre le socle du téléphone et le combiné par le biais d’ondes radio, et il se peut que vos conversations téléphoniques soient interceptées par d’autres équipements de réception d’ondes radio au sein de la portée du téléphone sans fil.
Appendix For C-UL compliance Mesures préventives pour les utilisateurs de stimulateurs cardiaques implantés dans l’organisme Stimulateurs cardiaques (ne s’applique qu’aux téléphones sans fil numériques) : L’organisme ‘Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une évaluation pluridisciplinaire des interférences entre les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans l’organisme.
Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.
Appendix FCC Part 68 and ACTA Industry Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this telephone.
Appendix FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Appendix California Energy Commission battery charging testing instructions This telephone is set up to comply with the energy-conserving standards right out of the box. These instructions are intended for California Energy Commission (CEC) compliance testing only. When the CEC battery charging testing mode is activated, all telephone functions, except battery charging, will be disabled.
Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 1.
Appendix Limited warranty 4.
Appendix Limited warranty 6. What must you return with the PRODUCT to get warranty service? You must: a. Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and b. Include “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; and c. Provide your name, complete and correct mailing address, and telephone number. 7.
Appendix Technical specifications RF frequency band 1921.536MHz — 1928.448MHz Channels 5 Operating temperature 32°F — 122°F 0°C — 50°C Telephone base voltage (AC voltage, 60Hz) 96 — 129 Vrms Telephone base voltage (AC adapter output) 6VDC @600mA Handset battery 2.
www.telephones.att.com The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. © 2013-2014 Advanced American Telephones. All Rights Reserved.
