User Manual

THIS SIDE UP / CE
CÔ
TÉ
V
ERS LE HA
UT
Battery
Pack
/
Bloc-pi
les
:
BT
1
83342/BT2
8
33
4
2 (2.4V 400mA
h
N
i-MH
)
WA
RNING /
A
VERTISSEMENT
:
DO NOT BURN OR PUNCTURE BA
TTER
I
ES
.
NE
PA
S INCINÉRER OU PERCE
R
LES PI
L
ES.
Made in
China / Fa
b
riqué
en
c
hine
CR
1
349
THIS
S
Battery Pack /
B
BT183342/BT283
WA
RNING /
AV
ER
DO NOT BURN OR
NE
PA
S INCINÉRER
Made in China / Fa
b
Plug!
Set ringer volume
5
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to the Abridged user’s
manual provided in the package, or see the Complete user’s
manual at www.telephones.att.com/manuals.
Quick start guide
TL96273/TL96323/TL96373/TL96423/TL96473
Charge for at least
30 minutes before
initial settings.
Charge for 11 hours
before initial use.
•
•
1
2
INSTALLATION COMPLETED!
Keep reading for common settings and operations.
DSL filter
If you have DSL high-speed
Internet service, a DSL filter
(not included) is required.
Light on!
Parts checklist
Handset
(2 for TL96273)
(3 for TL96323/TL96373)
(4 for TL96423/TL96473)
Charger with power adapter
(1 for TL96273)
(2 for TL96323/TL96373)
(3 for TL96423/TL96473)
Telephone base
Telephone line cord
Telephone base power adapter
•
•
•
•
•
Battery compartment cover
(2 for TL96273)
(3 for TL96323/TL96373)
(4 for TL96423/TL96473)
Battery
(2 for TL96273)
(3 for TL96323/TL96373)
(4 for TL96423/TL96473)
Wall-mount bracket
Abridged user’s manual
Quick start guide
•
•
•
•
•
Your package contains:
Plug!
Install telephone base & charger
1
Install handset battery
2
Install telephone base on the wall (optional)
3
Set the date/time before using the answering system.
Using a cordless handset or the telephone base:
1. Press MENU -> Press q/p to Set date/time -> Press SELECT.
2. Enter the month (MM), day (DD) and year (YY) -> Press NEXT.
3. Enter the hour (HH) and minute (MM).
4. Press q/p to choose AM or PM -> Press SAVE.
You can set the ringer volume level to one of the six levels or turn the
ringer off.
Using a cordless handset or the telephone base:
1. Press MENU -> Press q/p to Ringers -> Press SELECT.
2. Press SELECT to select Ringer volume.
3. Press q/p to choose the desired level -> Press SET.
Add a Bluetooth cell phone / headset
6
Set date and time
4
To use a Bluetooth enabled cellular phone or headset with your
telephone, you must first pair and connect your Bluetooth cellular phone
or headset with the telephone base.
Bluetooth wireless technology operates within a short range (up to
30 feet). Keep the connected device within 15 feet of the telephone
base for optimal performance.
To pair and connect a cell phone using the telephone base:
1. Press MENU -> Press q/p to Bluetooth -> Press SELECT.
2. Press SELECT to select Add device.
3. Press SELECT to select Add cellular.
4. Disconnect the cell phone from any Bluetooth device -> Press NEXT.
5. Place the cell phone next to the telephone base.
6. Press NEXT to turn on the telephone base discoverable mode.
7. Turn on the Bluetooth feature of your cell phone and search for or
add new devices. Once your cell phone finds your AT&T phone (AT&T
DECT 6.0), press the appropriate key on your cell phone to continue
the pairing process.
Enter the cell phone passcode (typically 0000), if required ->
Press SET.
Enter the PIN (default PIN: 0000) of the telephone base into your
cell phone, if required.
To pair and connect a headset using the telephone base:
1. Press MENU -> Press q/p to Bluetooth -> Press SELECT.
2. Press SELECT to select Add device.
3. Press q/p to Add headset -> Press SELECT.
4. Disconnect your headset from any Bluetooth device -> Press NEXT.
5. Set your headset to discoverable mode -> Press NEXT.
6. Press q/p to choose your headset, if required -> Press SELECT.
Enter the PIN (typically 0000) of your headset, if required, and
press NEXT.
•
•
•
Basic steps to set up & operate your phone
Basic installation
1
Install telephone base & charger
2
Install handset battery
3
Install telephone base on the wall (optional)
Common settings
4
Set date and time
5
Set ringer volume
6
Add a Bluetooth® cell phone / headset
7
Download a cell phone directory
8
Record own announcement
9
Set number of rings
Common operations
10
Directory
11
Caller ID
Refer to the following instructions only if you would like to mount the
telephone on a wall.
1 2
3 4
5 6
Flip down!
Click!
Push to open!
Click!
Plug!
Align!
Align!
If you have DSL high-speed
Internet service, a DSL filter
(not included) is required.
Unplug!
Unplug!
Click!
Plug!
Click!
Plug!
AU
T
1349
Slide
upward!
Click!
3