Quick Start AT&T Wireless Home Phone Base
Getting To Know Your Device Before You Begin Wireless Home Phone Base uses the AT&T cellular network and DOES NOT use your home phone wall jacks. Your device should be located: • Where you have a strong signal from a cell tower, typically near a window or outside wall. Signal strength may vary in different parts of your home. • Near an electrical wall outlet.
Install the Back-up Battery Connect the Device to a Phone Remove the lid from the battery compartment. 1) Unplug your phone from your home phone wall jack. Insert the battery connection cable into the battery port. Place the back-up battery in the battery slot and replace the battery cover. Turn on Your Device Plug the power cord into an electrical wall outlet that is not controlled by a wall switch.
For More Information • For help on setting up your AT&T voicemail, go to att.com/voicemailsetup. • Visit att.com/whpsupport to view videos on how to set up, use and troubleshoot your Wireless Home Phone Base. • Refer to your User Guide for detailed information about using your Wireless Home Phone Base, including advanced troubleshooting and frequently asked questions. • Call AT&T Customer Care at 1-800-331-0500 for assistance with your AT&T service.